Radio Shack 43-3905 - Manual (Page 10)

10
During an incoming call, the phone company automatically
sends the correct time between the first and second rings to
update your system’s display.
Review Call Records
Press UP or DOWN to review the new calls. After all new calls
have been reviewed, END OF NEW CALL appears.
To review all the records from oldest to newest, press UP. To
review the records from newest to oldest, press DOWN. After
reviewing all records in memory, END OF LIST appears.
• If an incorrect, invalid, or incomplete Caller ID signal is
received, LINE ERROR appears on the display.
• If the name and number are not available due to the
caller’s restriction, PRIVATE CALL appears on the display.
• If the name and number are not available,
--UNAVAILABLE-- appears on the display.
• RPT appears with a number if you have received a call
from the same phone number more than once.
• If you do not press a button within about 15 seconds, the
system automatically returns to the normal display.
n
Notes:
• The NEW indicator remains flashing until you have reviewed all
new calls.
• The number of new calls does not change until all calls have been
reviewed and END OF NEW CALL appears. The new call counter
then resets to 0.
Call Back from Caller ID Memory
1. Press UP or DOWN to find the number to call back.
2. Press CALL BACK twice. LIFT HANDSET or PICK UP CALL
appears.