Radio Shack 43-3905 - Manual (Page 4)

4
To mount the phone directly on a wall:
1. Drill two holes 3.25 inches (83 mm) apart, one below the
other.
2. Thread a screw into
each hole, letting the
heads extend about
0.2 inch (5mm) from
the wall.
3. Plug one end of
the supplied long
modular cord into the
LINE jack at the back
of the base.
4. Align the base’s
keyhole slots with the
installed screws and slide the phone downward to secure it.
To connect the handset, plug one end of the supplied coiled
cord into the handset’s modular jack. Then connect it to the jack
on the left bottom of the base.
n
Notes:
• Your local RadioShack store sells a variety of longer coiled handset
cords, which are especially useful when you mount the phone on a
wall.
• If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this system does not
disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or
a qualified installer.
• Select a location for your telephone that is near a telephone jack
and not in the way of normal activities in the area.
• Your telephone connects directly to a modular telephone line
jack. If your telephone wiring does not have a modular jack, you
can update the wiring yourself using jacks and adapters (available
0.2”(5mm)
3.25”
(83mm)