Ringdale Gigabit - Manual (Page 36)

Chapter 4 Using the command line interface
28 Using the Smart Ringswitch Gigabit Module
Setting the Gigabit Spanning Tree encapsulation mode
The set gigabit port STP encapsulation mode command enables or disables the process of encapsulating BPDUs
from Gigabit Ethernet when they are forwarded onto token ring, and de-encapsulating BPDUs when they are
forwarded from token ring onto Gigabit Ethernet.
Clearing the Gigabit port RIF Cache
The
set gigabit port RIF cache cleared
command deletes the RIF cache for the specified Gigabit port. The cache
is used when translating transparently forwarded Gigabit Ethernet frames to source-routed token ring frames.
Command: >set Gigabit port STP encapsulation mode : <1,2>
Parameter: slot Slot number
port Port number
1 Enable
2 Disable
Command: >set Gigabit port RIF cache cleared : <1>
Parameter: slot Slot number
port Port number
1 Clear
Gigdoc.book Page 28 Tuesday, October 17, 2000 9:44 AM