Ringdale Gigabit User Manual
Page 23
Chapter 3
Reading status indicators
100-398-01
15
Reading s
tat
us
LCD status messages for the Smart Ringswitch Gigabit Module
The LCD panel displays additional status messages for the Smart Ringswitch Gigabit Module. Status messages
for the Gigabit port provide detailed information about the status and operation of the port. To display this
information, press the paddle down until the LCD screen displays the Smart Ringswitch Gigabit Module’s
name. Then press the paddle up to provide detailed information about the Gigabit port on the Smart
Ringswitch Gigabit Module. The Gigabit port status messages that the LCD panel displays are
described in Table 3.2.
Table 3.2
Gigabit port status messages on the LCD panel
Message
Description
Slot
Rev 0?
XXX
The location of the card, what the card is, and the hardware
revision number
6:1 SR=3EE/FwdS TB=Disa
(49) Open Lk:Up ARxP
6:1
The slot and port number of the Gigabit port
SR=3EE/FwdS
The forwarding mode, number of the ring attached to the
port, and the source routing status
TB=Disa
The transparent status of the port
(49) Open
The ‘total’ port number and interface mode (see Table 3.3)
Lk:Up ARxP
The port link status and the port mode status (see Table
3.4)
Gigdoc.book Page 15 Tuesday, October 17, 2000 9:44 AM