Ringdale Gigabit - Manual (Page 32)

Chapter 4 Using the command line interface
24 Using the Smart Ringswitch Gigabit Module
Setting the Gigabit port flow negotiation mode
The set gigabit port flow negotiation mode command specifies the way the Gigabit Module negotiates flow
control with a connecting device.
Command: >set Gigabit port flow negotiation mode : <1,2,3,4>
Parameter: slot Slot number
port Port number
1 None
2 Tx only
3 Rx only
4 Tx and Rx
Gigdoc.book Page 24 Tuesday, October 17, 2000 9:44 AM