RCA VR525 - Manual (Page 20)

18
VCR Basics
Remote Buttons
CHANNEL Up or Down Selects next higher or lower channel
in the VCR’s channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow
motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode,
press to go back to the previous menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR’s tuner. Line
input refers to the signal coming from the component
connected to the AUDIO/VIDEO IN jacks on the back of the
VCR.
MENU Brings up VCR MAIN MENU on the TV screen.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the
other two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
REC Starts VCR recording. Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH Displays INDEX and GO-TO Search menus on TV
screen when VCR is stopped. Advances the tape 30 seconds of
recorded material during playback. Each press advances the
tape an additional 30 seconds up to five minutes.
SLOW Used for slow-motion playback.
SPEED Selects a recording speed (SP or SLP).
SEARCH
POWER
REV
PLAY
FWD
REC STOP PAUSE
INPUT
GO BACK
TRACK
F.ADV
CLEAR MENU
1 2 3
4 5 6
7 8 9
0
CHANNEL
INFO SPEED
SLOW
TV•VCR
- +