Radio Shack ET-1111 - Manual (Page 11)

11
Follow these steps to turn the Caller ID/
Call Waiting feature on or off.
1. Lift the handset and press FUNC-
TION .
2. Press to move the cursor to
CIDCW (Caller ID/Call Waiting).
3. Press SELECT to change the Caller
ID/Call Waiting setting. On or Off
appears indicating the selected set-
ting.
4. Press FUNCTION or return the hand-
set to the base to store the new set-
ting.
STORING YOUR AREA
CODE
To quickly dial a number from a Caller
ID record (see “Dialing Numbers from a
Caller ID Record” on Page 19) or to cor-
rectly store a number from a record into
a memory dialing location (see “Storing
a Caller ID Record to Memory” on
Page 18), you must store your local area
code in the ET-1111’s memory. Then,
when you dial from a Caller ID record,
the ET-1111 skips the area code if it
matches the one you stored.
Follow these steps to store your area
code.
1. Lift the handset and press FUNC-
TION .
2. Press to move the cursor to Area
Code .
3. Press SELECT , then enter your 3-
digit area code. If you make a mis-
take, press DELETE until the incor-
rect entry is deleted, then enter the
correct number.
Note: To delete an old area code,
press
DELETE three times. Then en-
ter your area code.
4. Press SELECT to store the area
code, then press FUNCTION or re-
turn the handset to the base to clear
the display.
43-1111.fm Page 11 Tuesday, June 29, 1999 3:42 PM