Radio Shack ET-543 - Manual (Page 11)

11
Notes:
• If you do not have special phone
services, pressing FLASH/DEL
might disconnect the current call.
• The redial memory does not store
a FLASH/DEL entry or any digits
entered after you press FLASH/
DEL .
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Set TONE/PULSE on the base to
PULSE .
2. Dial the service’s main number.
3. When the service answers, press
* on the keypad. A appears on the
display. Then dial the additional
numbers. The phone sends these
numbers as tone signals.
4. When you complete the call, place
the handset on the cradle or press
TALK to disconnect the call. The
phone automatically resets to the
pulse mode.
Note: We recommend you not use RE-
DIAL to dial numbers that include a
tone ( * ) entry.
USING PAGE
The PAGE feature allows someone at
the base to page you at the handset. It
also helps you find the handset if you
misplaced it.
With the handset’s power on, the
handset beeps four sets of two beeps
when you press
PAGE on the base.
The TALK key on the handset flashes,
and the channel number and INT ap-
pear on the display.
Note: The handset will not beep during
a call.
MEMORY DIALING
You can store up to 30 phone numbers
for quick and easy dialing. Each stored
number can be up to 16 digits long.
Notes:
• If TONE/PULSE is set to PULSE
and you want to use tone dialing
for a memory number, you must
store the tone entry along with the
number.
43-1043.fm Page 11 Tuesday, August 17, 1999 10:36 AM