RCA 1539213A - Manual (Page 32)

30
Hooking Up the TV/VCR
Connect a VCR or Camcorder for Copying Ta p e s
A. VCR for Copying Tapes
1 . Connect as shown.
This connection requires additional accessories
not provided.
2 . Plug in power cords of VCR and
TV/VCR.
3 . Turn to page 27 for “Copying and
Editing Tapes.”
Press 00 on the remote to select the line
(audio/video) inputs on the TV/VCR to receive
the signal from the VCR.
If your VCR has stereo AUDIO OUT jacks,
connect the audio cable to the jack labeled
MONO
. If neither jack is labeled MONO, you
may need a Y- adapter to hear both channels.
B. Camcorder for
Copying Tapes
1 . Connect as shown.
This connection requires additional accessories
not provided.
2 . Plug in TV/VCR’s power cord.
3 . Turn to page 27 for “Copying and
Editing Tapes.”
Press 00 on the remote to select the line
(audio/video) inputs on the TV/VCR to receive
the signal from the camcorder.
If your camcorder has stereo AUDIO OUT jacks,
you may need a Y- adapter to hear both channels.
Caution: The unauthorized recording of
television programs and other materials
may infringe upon the rights of others.
A
B
Caution: The unauthorized recording of
television programs and other materials
may infringe upon the rights of others.