RCA 1539213A - Manual (Page 18)

16
Playing a Tape
Operating Instructions
To Play a Tape
Safety Tab
PLAY 0 : 0 0 : 0 0
1 . Insert a tape in the TV/VCR.
The TV/VCR automatically turns on. The tape
automatically begins to play if the safety tab on the
cassette has been removed and the Auto Play feature has
been turned on.
2 . Press PLAY, if necessary.
The word PLAY and the time counter appear on the
screen.
3 . If necessary, while the tape is playing, press TRACKING
or on the remote or CHAN up or down on the TV/VCR
to remove any streaks from the picture. Details are on page
18
4 . Press STOP on the remote or STOP/EJECT on the
TV/VCR to stop playback.
5 . Press REW to rewind the tape. If the VCR is playing a tape
when the REW button is pressed, the TV/VCR will search
backwards through the tape. If the REW button is pressed
while the TV/VCR is not playing a tape, the tape will
rewind back to its start.
• After the tape reaches its end during playback, it will
automatically rewind back to the beginning of the tape
and eject the tape.
• Pressing the remote’s POWER button while the tape is
rewinding will not stop the tape. The tape will continue
to rewind until it reaches its beginning, and then the
TV/VCR will turn off.
6. Press FF to advance the tape. If the VCR is playing a tape
when the FF button is pressed, the TV/VCR will search
forward through the tape.
7 . Press STOP/EJECT on the TV/VCR to eject the tape once
it is completely rewound.
A cassette may be ejected if the power is turned off.