RoyalTek Bluetooth GPS Datalog Receiver MBT-1100 - Manual (Page 21)

If the memory is full then the system will stop to record.
◆ Memory Erase
Erase all memory.
◆ Log Method
Check the log will save when button pushed.
Log by time
◆ Log config
Show the Flash Usage.
Step 3: User adjustable: Memory Full Option, key in the Time Interval.
When you done the configuration setup, press the “Set Log Config.”
button to save the setting to the receiver.
Finally, these setting take effect.
PDF 檔案以 "pdfFactory Pro" 試用版建立 www.pdffactory.com