RoyalTek Bluetooth GPS Datalog Receiver MBT-1100 User Manual
Page 17
17
3.3 Transfer data to your PC or Notebook
Usage Notes:
(1) When you turn on the power button, it starts to search the GPS
Signal. After the GPS position fixed, it will begin to record and save
the position data.
(2) If you want to stop recording the GPS data, just turn the power
off.
(3) When download or erase data form MBT-1100, Receiver still
continues record and save the position data.
(4) The time of the log data of MBT-1100 is UTC Time. User doesn’t
need to adjust the Clock setting of a camera.
3.3.1 Connect MBT-1100
l Turn on the power of MBT-1100 and use the USB cable to connect to
the USB port on PC.
l Check the COM port of MBT-1100 first. Click “Start” à “Control
Panel”à”Performance and Maintenance”à“System”, and you will
see the System Properties dialog box; click on “Hardware” tab and
then the “Device Manager” button. Expand the “Ports (COM & LPT)”
item, and the “Prolific USB-to-Serial Com Port” is the COM port of
your MBT-1100.
Open data download Utility
For the First using
Step 1: Open the designated serial port and the button show “Connect”.
PDF 檔案以 "pdfFactory Pro" 試用版建立