Radio Shack 3-DVD Changer - Manual (Page 13)

13 Remote Control Operation
SETTING UP THE SURROUND SOUND
SYSTEM
You can use your Home Theater Audio System as soon as you take it
out of the packaging. If you wish to fine-tune the system (for example,
substitute different speakers or alter the sound distribution), follow the
directions below.
Changing the Speaker Size
Note: If you are using the speakers provided in your Home Theater
Audio System, the speaker size defaults are correct. If you are using
other speakers, follow these steps.
1. Press POWER .
2. Press SETUP .
IFýI?P; IFýI?P; IFýI?P; IFýI?P;
appears.
3. Press
7 7 7 7
. appears.
4. Press
7 7 7 7
again.
<#IC7BB <#IC7BB <#IC7BB <#IC7BB
appears. To change to
<#B7H=; <#B7H=; <#B7H=; <#B7H=;
, press
8 8 8 8
or
9 9 9 9
.
Note: If the cone size (diameter) of the speaker is larger than 5
inches, change to
<#B7H=; <#B7H=; <#B7H=; <#B7H=;
.
5. Press ENTER .
9;DJ;H 9;DJ;H 9;DJ;H 9;DJ;H
appears.
6. Press
7 7 7 7
.
9#IC7BB 9#IC7BB 9#IC7BB 9#IC7BB
appears. To change to
9#B7H=; 9#B7H=; 9#B7H=; 9#B7H=;
, press
8 8 8 8
or
9 9 9 9
. To change to
9#DED; 9#DED; 9#DED; 9#DED;
, press
8 8 8 8
or
9 9 9 9
again.
Note: If the cone size (diameter) of the speaker is larger than 5
inches, set the item to
9#B7H=; 9#B7H=; 9#B7H=; 9#B7H=;
.
7. Press ENTER .
IKHH IKHH IKHH IKHH
appears.
8. Press
7 7 7 7
.
I#IC7BB I#IC7BB I#IC7BB I#IC7BB
appears. To change to
I#ýB7H=; I#ýB7H=; I#ýB7H=; I#ýB7H=;
, press
8 8 8 8
or
9 9 9 9
. To change to
I#DED; I#DED; I#DED; I#DED;
, press
8 8 8 8
or
9 9 9 9
again.
Note: If the cone size (diameter) of the speaker is larger than 5
inches, set the item to
I#B7H=; I#B7H=; I#B7H=; I#B7H=;
.
9. Press ENTER .
IK8#M< IK8#M< IK8#M< IK8#M<
appears.
10. Press
7 7 7 7
.
IM#O;I IM#O;I IM#O;I IM#O;I
appears. If you aren’t using a subwoofer,
change to
IM#DE IM#DE IM#DE IM#DE
by pressing
8 8 8 8
or
9 9 9 9
.
11. Press ENTER . appears. Press SETUP again to exit.
Changing the Channel Level
The default channel level settings are 0 dB for each speaker. You can
change the speakers’ sound distribution to suit your surround sound
needs. For example, if you are closer to the left front speaker than the
right front speaker, the left front speaker might seem “louder” than the
right one. To adjust it, you must change the channel level for one or
both speakers until the sound evens out.
Follow these steps to change the channel level.
1. Press SETUP , then
8 8 8 8
.
9>ýB;L;B 9>ýB;L;B 9>ýB;L;B 9>ýB;L;B
appears.
2. Press
7 7 7 7
. appears.
3. Press
7 7 7 7
again.
<ý &Z8 <ý &Z8 <ý &Z8 <ý &Z8
appears. To change the front left
speaker’s level, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the
desired level (
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
4. Press ENTER .
9ýB;L;B 9ýB;L;B 9ýB;L;B 9ýB;L;B
appears.
5. Press
7 7 7 7
.
9ý&Z8э 9э&Z8э 9э&Z8э 9э&Z8ý
appears. To change the center speaker’s level,
repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level (
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
6. Press ENTER . appears.
7. Press
7 7 7 7
. appears. To change the front right speaker’s
level, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level
(
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
8. Press ENTER .
IHýB;L;B IHýB;L;B IHýB;L;B IHýB;L;B
appears.
9. Press
7 7 7 7
.
IHý&Z8ý IHý&Z8ý IHý&Z8ý IHý&Z8ý
appears. To change the rear right speaker’s
level, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level
(
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
10. Press ENTER .
IBýB;L;B IBýB;L;B IBýB;L;B IBýB;L;B
appears.
11. Press
7 7 7 7
.
IBý &Z8ý IBý &Z8ý IBý &Z8ý IBý &Z8ý
appears. To change the rear left speaker’s
level, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level
(
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
12. Press ENTER .
IMýB;L;B IMýB;L;B IMýB;L;B IMýB;L;B
appears.
13. Press
7 7 7 7
.
IMý&Z8ý IMý&Z8ý IMý&Z8ý IMý&Z8ý
appears. To change the sub woofer’s level,
repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level (
¶'& ¶'& ¶'& ¶'&
to
!'&ýZ8 !'&ýZ8 !'&ýZ8 !'&ýZ8
).
14. Press ENTER . appears.
15. Press SETUP to exit.
Changing the Speaker Distance
When you have your home theater arrangement the way you want it
(speakers, receiver, and any components), you can change the
speaker distance entered in the receiver’s memory. The default set-
tings are 10 ft.
1. Imagine there is a straight line running from the front left speaker
to the front right speaker.
2. Measure the distance in a perpendicular line from your listening
position (for example, your couch) to the imaginary line.
Note: Do not meaure the distance to the speakers, just the line.
3. Repeat Steps 1–2 for the rear (surround) speakers.
4. Measure the distance in a perpendicular line from your listening
position (for example, your couch) to the center speaker.
5. Press SETUP , then press
8 8 8 8
twice.
IFý:?IJ IFý:?IJ IFý:?IJ IFý:?IJ
appears.
6. Press
7 7 7 7
. appears.
7. Press
7 7 7 7
again.
<ý'& <ý'& <ý'& <ý'&
appears. To change the distance between
the listening position and the front speakers, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level (
&ý &ý &ý &ý
to
)&ý )&ý )&ý )&ý
).
8. Press ENTER .
9;DJ;H 9;DJ;H 9;DJ;H 9;DJ;H
appears.
9. Press
7 7 7 7
.
9ý'& 9ý'& 9ý'& 9ý'&
appears. To change the distance between the
listening position and the center speaker, repeatedly press
8 8 8 8
or
9 9 9 9
until you reach the desired level (
&ý &ý &ý &ý
to
)&ý )&ý )&ý )&ý
).
10. Press ENTER .
IKHH$ IKHH$ IKHH$ IKHH$
appears.