Remote control operation – Radio Shack 3-DVD Changer User Manual

Page 12

Remote Control Operation

Remote Control Operation

A QUICK LOOK AT THE REMOTE CONTROL

OPERATING RANGE OF THE REMOTE
CONTROL

The remote control may not work properly if:

• There are obstacles between the remote control and the

receiver’s remote sensor.

• Direct sunlight or fluorescent light is shining onto the remote sen-

sor.

• The receiver is located near a device that is emitting infrared

rays.

• The receiver is operated simultaneously with another infrared

remote control.

BAND

– selects AM or FM band while listening to the

tuner function.

FM MODE

(FM MONO/STEREO) – selects FM

mono or stereo mode.

MEMORY

– Press to memorize the desired station

frequency.

TUNING MODE

– selects and deselects preset mode.

PRESET – / +

–- During AM or FM reception, you can

scan through other frequencies or select the preset
numbers.

MUTE

– Press to immediately decrease the sound lev-

el.

CKJ;

appears on the display panel. To restore the

sound, press again.

SLEEP

– Press to set the sleep time. The

sleep time changes to

, ...

(minutes), and

E<<

(former display).

TONE

– Lets you adjust the low frequency

level (BASS) with (left arrow icon) or (right ar-
row icon) and also you can adjust high fre-
quency level (TREBLE) with (left arrow icon)
or (right arrow icon) according to your taste
and room acoustics.

TEST TONE

– Turns on or off the test tone function in

DTS, DOLBY DIGITAL, or PRO LOGIC mode. The test
tone is output from Front L speaker, Center speaker,
Front R speaker, Surround R speaker, Surround L
speaker, (Subwoofer speaker: when Subwoofer on).

SURROUND

– When you select an analog

source (

TUNER

AUX

TAPE

VCR

, or

SAT

), as you press

SURROUND

, the sur-

round mode changes.