beautypg.com

Removing and inserting the sd card, Sd card contents – Radio Shack iScan PRO-107 User Manual

Page 23

background image

44

D

at

a

45

D

at

a

Removing and Inserting the SD Card

w

Warning: To prevent data corruption on the SD card, before

removing the batteries:

• Turn iSCAN off by pressing holding .
• Unplug from external power

The SD card will be damaged if removed while the iSCAN is in

operation and powered by external power.

SD card
Push to remove

To remove the SD card:

1. Turn off iSCAN by pressing and holding .
2. Unplug from external power.
3. Remove the battery compartment cover and the batteries.
4. To eject the SD card, push the bottom of the SD card until it

clicks.

5. Slide the SD card out of the slot.

To insert the SD card:

1. Position the SD card face up and slide into the slot.
2. Gently push in the SD card until it clicks to lock it in place.
3. Replace the batteries and battery compartment cover.

SD Card Contents

The following table shows the directory structure for iSCAN’s SD
card. You may wish to make a copy of the CDAT folder on your
computer as a backup.

w

Warning: Modifying these directories or their contents is not

recommended and may cause iSCAN to malfunction.

BTMP

Contains temporary files used by iSCAN while it is running.

CDAT

Contains your iSCAN programming.

DB

Contains the RadioReference Library.

MTMP

Contains temporary files used by iSCAN while it is running.

STMP

Contains temporary files used by iSCAN while it is running.

SD Card Error Messages

iSCAN’s SD card must be formatted correctly to work with the

scanner. If the SD card is corrupted, defective, improperly formatted,

improperly installed, or missing, iSCAN will report one or more of the

following errors:

No SD card found

Unable to get an initialization response from the

SD card at power-up

No file system on SD

card

Unable to read valid low-level file system informa-

tion (partition tables, etc.) from installed SD card

at power-up

Bad file system: 32k

clusters required

SD card has a cluster size other than 32k. 32k is

required by iSCAN

SD Read Error

Unrecoverable error reading the SD card. Try

powering iSCAN off and on again.

SD Write Error

Unrecoverable error writing the SD card. Try pow-

ering iSCAN off and on again.

SD card Full!

The SD card has no more free space

SD card is not

inserted

The SD card socket indicates that no SD card is

inserted

SD card is write

protected

The SD card socket indicates that the SD card’s

write-protect switch is in the “lock” or “protected”

position

This manual is related to the following products: