Radio Shack iScan PRO-107 - Manual (Page 19)

36
Se
ar
ch
in
g
37
Se
ar
ch
in
g
–Services– Menu
Aircraft Search civilian and military air frequencies:
108-118 MHz Navigation
118-137 MHz Civilian Voice
138-150 MHz Military Voice (excludes 2m Amateur)
225-400 MHz Military Voice
Railroad Search the Association of American Railroads (AAR) VHF
railroad frequencies used in the US and Canada.
Amateur Search amateur radio frequencies:
28.0-29.7 MHz 10m Band
50-54 MHz 6m Band
144-148 MHz 2m Band
222-225 MHz 1.25cm Band
420-450 MHz 70cm Band
902-928 MHz 33cm Band
1240-1300 MHz 23cm Band
CB Search the Citizens Band radio frequencies.
Marine Search the VHF-FM marine radio band.
FRS/GMRS/
MURS
Search the FRS, GMRS, MURS, DOT and STAR radio
frequencies.
To change the Service Search parameters:
Press MENU while any Service Search is active. The following options
are available:
–”Service X”– Menu
Main Menu Navigates to iSCAN’s Main Menu.
Srvc Srch Menu Navigates to the Services Menu.
Store Channel
Stores a found frequency as an object in the first playlist.
Cancel Changes Exits the Service Search Menu without saving changes.
Save Changes
Saves your changes and exits the Service Search Menu.
Attenuator Limits the effective range of Service Search and may
help reduce interference from strong local transmitters.
Press /II/SEL or  to enable or disable Attenuator.
–”Service X”– Menu
Zeromatic Helps iSCAN tune to exact frequencies when searching.
Press /II/SEL or  to enable or disable Zeromatic.
Zeromatic does not have any effect in channel-based
searches such as CB, Marine and FRS/GMRS/MURS
bands.
Delay When delay is enabled, iSCAN waits for two seconds
after a transmission before resuming search. Press /II/
SEL or  to enable or disable delay.
RX Mode Sets the RX modulation mode to automatic, or forces
AM mode or FM mode. RX Mode functions in Aircraft
and Amateur bands. Press  or  to change.
Frequency
Ranges
For Service Searches that utilize frequency ranges, this
option allows you to control which ranges are searched.
The Frequency Ranges option is available in the Public
Safety, Aircraft and Amateur Radio Service Searches.
Press /II/SEL or  to enable or disable frequency ranges.
Limit Search
iSCAN’s Limit Search feature allows you to configure a customized
search between the lower and upper frequencies that you choose.
To use Limit Search:
1. Press MENU to access the Main Menu, scroll to Search , and
press  to enter to the Searches Menu.
2. Scroll to Limit Search and press  to start the Limit Search.
n
Note: Press SKIP to block reception of undesired signals.
To store found objects in playlists:
1. Press MENU when you find a frequency you want to store.
2. Select
Store Channel .
3. Press SEL. The new object is added to the first playlist and has
the alpha tag “Stored Search.”
n
Note: To move the new object to another playlist or edit
the alpha tag, use the Object Edit Menu (see page 29) or the PC
Application (see page 46).