Renesas Converter Board M3T-F160-64NSD - Manual (Page 4)

1. Outline
The M3T-F160-64NSD is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 64-pin
0.5-mm-pitch LQFP (64P6Q-A).
2. Package Components (See Figure 1)
(1) M3T-F160-64NSD converter board ............................ 1 pc.
(2) NQPACK064SD-ND (made by Tokyo Eletech Corporation) ......... 1 pc.
(3) YQPACK064SD
(made by Tokyo Eletech Corporation)
................ 1 pc.
(4) YQSOCKET064SDF
(made by Tokyo Eletech Corporation)
......... 1 pc.
Pre-mounted on the converter board M3T-F160-64NSD
(5) YQ-GUIDE’s
(made by Tokyo Eletech Corporation)
....................4 pcs.
(6) M3T-F160-64NSD User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
64P6Q-A
(64-pin 0.5-mm-pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The M3T-F160-64NSD can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK064SD-ND on the user system.
(1) For
debugging
Mount the NQPACK064SD-ND on the foot pattern of the
user system and attach the YQPACK064SD on it. And
connect the probe of the emulation pod to the upper
connector of the M3T-F160-64NSD. Then connect the
YQPACK064SD and the M3T-F160-64NSD.
(2) For
onboard evaluation
Mount an MCU with on-chip flash memory or QzROM
and the HQPACK064SD (separately available) in that
order on the NQPACK064SD-ND on the user system.
Before using the M3T-F160-64NSD, be sure to read "6.
Precautions" on page 3.
M3T-F160-64NSD
YQ-GUIDE (x4)
YQPACK064SD
NQPACK064SD-ND
Figure 1 Package components of the M3T-F160-64NSD
M3xxxxT-RLFS,
FLX160-PRB
or
M3xxxxTx-EPB
(1) For debugging
M3T-F160-64NSD
YQ-GUIDE (x4)
YQPACK064SD
NQPACK064SD-ND
64-pin 0.5-mm-pitch
(64P6Q-A) foot pattern
(2) For on-board evaluation
HQPACK064SD
(separately available)
MCU with on-chip flash
memory or QzROM
: No. 1 pin
Be sure to align the pins.
Figure 2 Usage of the M3T-F160-64NSD
(2/4)