Renesas M3T-FLX-64NSA - Manual (Page 2)

(2/4)
1. Outline
The M3T-FLX-64NSA is a converter board for connecting the
100-core flexible cable FLX100 to a foot pattern for 64-pin
0.8-mm-pitch QFP (64P6N-A) or LQFP (64P6U-A).
2. Package Components (See Figure 1)
(1) M3T-FLX-64NSA converter board............................. 1 pc.
(2) YQPACK064SA (made by Tokyo Eletech Corporation) ......... 1 pc.
(3) NQPACK064SA160 (made by Tokyo Eletech Corporation) . 1 pc.
(4) YQ-GUIDE ................................................................4 pcs.
(5) M3T-FLX-64NSA User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
64P6N-A
(64-pin 0.8-mm-pitch QFP)
or
64P6U-A
(64-pin 0.8-mm-pitch LQFP)
Insertion/removal
iterations of connector
20 times guaranteed
4. Usage (See Figure 2)
The M3T-FLX-64NSA can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK064SA160 on the target system.
(1) For debugging
Mount the NQPACK064SA160 and YQPACK064SA on
the foot pattern of the target system in that order. And
connect the probe of the emulation pod to the upper
connector of the M3T-FLX-64NSA. Then connect the
YQPACK064SA and the M3T-FLX-64NSA.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK064SA (for 64P6N-A, separately
available) or HQPACK064SA160 (for 64P6U-A,
separately available) in that order on the
NQPACK064SA160 on the target system.
Before using the M3T-FLX-64NSA, be sure to read "7.
Precautions" on page 4.
Figure 1 Package components of the M3T-FLX-64NSA
Figure 2 Usage of the M3T-FLX-64NSA
(1) Debugging
M3T-FLX-64NSA
YQ-GUIDE (x4)
YQPACK064SA
NQPACK064SA160
(2) Onboard evaluation
For 64P6N-A:
HQPACK064SA
(separately available)
For 64P6U-A:
HQPACK064SA160
(separately available)
FLX100
: No. 1 pin
Be sure to align the pins.
64 0.8-mm
(64P6N-A, 64P6U-A)
foot pattern
MCU with on-chip
flash memory or
one-time PROM
M3T-FLX-64NSA
YQ-GUIDE (x4)
YQPACK064SA
NQPACK064SA160