ROTEL Five-Channel Power Amplifier RMB-1085 User Manual

Page 2

RMB-1085 Five-Channel Power Ampliﬁer

WARNING: There are no user serviceable parts inside.

Refer all servicing to qualiﬁed service personnel.

WARNING: To reduce the risk of ﬁre or electric shock,

do not expose the unit to moisture or water. Do not al-

low foreign objects to get into the enclosure. If the unit

is exposed to moisture, or a foreign object gets into the

enclosure, immediately disconnect the power cord from

the wall. Take the unit to a qualiﬁed service person for

inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on

the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around

the unit. Do not place the unit on a bed, sofa, rug, or similar surface

that could block the ventilation slots. If the component is placed in a

bookcase or cabinet, there must be ventilation of the cabinet to allow

proper cooling.

Keep the component away from radiators, heat registers, stoves, or

any other appliance that produces heat.

The unit must be connected to a power supply only of the type and

voltage speciﬁed on the rear panel of the unit.

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable

in any way. Do not attempt to defeat grounding and/or polarization

provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent

at severe angles, exposed to heat, or damaged in any way. Pay par-

ticular attention to the power cord at the plug and where it exits the

back of the unit.

The power cord should be unplugged from the wall outlet if the unit is

to be left unused for a long period of time.

Immediately stop using the component and have it inspected and/or

serviced by a qualiﬁed service agency if:
• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation.

• The unit has been dropped or damaged in any way.

Please use Class 2 Wiring when connecting the speaker terminals of the unit
to ensure proper insulation and minimize the risk of electrical shock.

Place the unit on a ﬁxed, level surface strong enough to

support its weight. Do not place it on a moveable cart that

could tip over.

��

This symbol means that this unit is double insulated. An

earth or ground connection is not required.

Rotel products are designed to comply with international

directives on the Restriction of Hazardous Substances (RoHS)

in electrical and electronic equipment and the disposal of

Waste Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance and that

the products must be appropriately recycled or processed

in accordance with these directives.