Radio Shack PRO-2048 User Manual

Page 23

Notes:

• If you program more than 20

skip frequencies, each new fre-
quency replaces old ones, start-
ing from the first stored
frequency.

• You can select the skipped fre-

quency when the scanner is in
the hold mode. The scanner dis-
plays

LOCKOUT

when you

select a skipped frequency.

• If you skip all frequencies in the

weather band or within a search
range, the scanner sounds three
beeps and will not start search-
ing.

LISTENING TO
MONITOR MEMORIES

After you temporarily store frequen-
cies into the scanner’s monitor mem-
ories, you can listen to them by
pressing

MANUAL

MON

, then the

number for the monitor memory you
want to listen to.

Note: To listen to the monitor memo-
ries, the priority channel feature must
be turned off (see “Using Priority
Channels” on Page 26).

MOVING A FREQUENCY
FROM A MONITOR
MEMORY TO A
CHANNEL

1. Press

MANUAL

to stop the scan-

ning.

2. Enter the channel number where

you want to store the monitor
frequency, then press

PGM

PROGRAM

appears.

20-417.fm Page 23 Wednesday, August 4, 1999 11:33 AM