Radio Shack PRO-2048 - Manual (Page 21)

21
6. When the scanner finds an
active frequency, you can do
one of the following:
• To store the displayed fre-
quency into the current moni-
tor memory, quickly press
MON .
• To continue the search, press
D or —.
• To hold the frequency, press
LIMIT . -H- appears.
Press LIMIT again to cancel the
hold and resume the limit
search.
Notes:
• If you press D or — during the
hold mode, the frequency
changes in the current step
increment toward the upper or
lower limit (see “Specifica-
tions” on Page 42).
• If you tune to a search skip
frequency, the display shows
LOCKOUT (see “Search Skip
Memory” on Page 22).
Direct Search
A direct search lets you specify a
starting frequency, then search for
active transmissions above or below
the specified frequency.
Note: You can also use the scan-
ner’s delay feature while using direct
search (see “Using the 2-Second De-
lay” on Page 27).
Follow these steps to search for ac-
tive frequencies using a direct
search.
1. Press MANUAL .
2. Using the number keys, enter
the frequency (including the dec-
imal point) you want to start the
search from, or the channel
number containing the starting
frequency.
3. Press D to search up or — to
search down starting from the
specified frequency or channel.
-d- , SEARCH , and s or t
appear, and the next available
monitor memory flashes.
Note: If you enter an invalid fre-
quency,
Error appears. Re-
peat Steps 2 and 3.
20-417.fm Page 21 Wednesday, August 4, 1999 11:33 AM