Radio Shack PRO-2048 - Manual (Page 11)

11
2. Using a pointed object, such as
a straightened paper clip, press
RESET on the back of the scan-
ner. The display resets, and the
scanner turns off.
3. Press POWER to turn on the
scanner again.
INITIALIZING THE
SCANNER
If the scanner or its display does not
work properly even after resetting it,
follow these steps to initialize the
scanner.
Caution: Initializing the scanner
clears all the channels you stored in
memory. Initialize the scanner only
when you are sure it is not working
properly.
1. If the scanner is off, press
POWER to turn it on.
2. Hold down • /CLEAR , then press
RESET on the back of the scan-
ner using a pointed object, such
as a straightened paper clip.
The display resets, and the
scanner turns off.
3. Press POWER to turn on the
scanner.
RESET DC 12V EXT SP
RESET DC 12V EXT SP ANT
20-417.fm Page 11 Wednesday, August 4, 1999 11:33 AM