Radio Shack PRO-2048 - Manual (Page 14)

14
SCAN Starts scanning through the stored channels.
MANUAL Stops scanning and lets you manually enter a channel
number.
L/O/SEARCH SKIP Turns the selected channel’s lockout function on and off,
or skips a specified frequency during a limit or direct
search.
DELAY Programs a 2-second delay for the selected channel.
PRI/HYPER SEARCH Sets and turns on and off the priority function for a partic-
ular channel, or selects the HyperSearch speed.
MON Stores frequencies into and accesses the 10 monitor
memories.
LIMIT Used to set the lower or upper limit during frequency
searches.
SPEED Changes the scanning or search speed.
POWER Turns the scanner on and off.
D — Enters the up or down direction in the search mode.
Number Keys Each key has a single-digit label and a range of numbers.
The single digits are used to enter a channel or a frequen-
cy. The range of numbers (21
– 40, for example) above the
key indicates the channels that make up a channel-stor-
age bank.
• /CLEAR Enters the decimal point in a frequency, or clears an incor-
rect entry. Also used when you initialize the scanner.
ENTER Enters programmed frequencies into channels.
PGM Programs frequencies into channels.
WX Searches through the seven preprogrammed weather
channels.
DATA Turns the data skip feature on and off.
20-417.fm Page 14 Wednesday, August 4, 1999 11:33 AM