Ricoh TRC-239 - Manual (Page 13)

13
1. Align the slots around the antenna’s connector
with the tabs on the antenna jack on top of the
TRC-239.
2. Press the antenna down over the jack and turn
the antenna’s base clockwise until it locks.
To remove the antenna, turn the antenna’s base
counterclockwise until it unlocks, then lift it off the an-
tenna jack.
Connecting an Optional Antenna
The TRC-239 comes with a flexible antenna
(equipped with a BNC connector) that is ideal for
most applications. However, the BNC connector
makes it easy to connect other types of antennas,
too. For mobile or base station use, you might want
to connect an optional external antenna. Your local
RadioShack store carries a wide selection of external
mobile or outdoor base station antennas. Choose the
one that best meets your needs.
When deciding on a mobile or base station antenna
and its location, consider the following:
• The location of the antenna should be as high as
possible.
• The antenna and antenna cable should be as far
as possible from sources of electrical noise
(appliances, other radios, and so on).
• The antenna should be vertical for the best per-
formance.
21-1628.fm Page 13 Tuesday, January 25, 2000 9:30 AM