Ricoh TRC-239 - Manual (Page 11)

11
Follow these steps to connect the TRC-239 to your
vehicle’s battery power.
1. Plug the power cord’s Adaptaplug into the TRC-
239’s POWER jack.
2. Connect the other end of the power cord to your
vehicle’s cigarette lighter socket.
USING AC POWER
You can power the TRC-239 using an optional DC
power supply that provides 13.8 volts (12-volt nomi-
nal) at 1300 mA. You also need a fused power cord
that ends in a size M Adaptaplug adapter (neither
supplied). Both are available at your local Ra-
dioShack store.
Cautions:
You must use a power supply that sup-
plies 13.8V DC and delivers at least
1300 mA. Its fused connecting cord’s
center tip must be set to positive and its plug
must fit the TRC-239's
POWER jack. Using a
power supply that does not meet these specifi-
cations could damage the TRC-239, the power
cord, or the power supply.
• Always connect the power supply to the TRC-
239 before you connect it to AC power. When
VOLUME
SQUELCH
DC 13 .8V CH AR GE
HI
LO PW R
MIC
TX/BATT
CHARGE
CITIZENS BAND TRANSCEIVER
!
21-1628.fm Page 11 Tuesday, January 25, 2000 9:30 AM