RCA CDRW120 - Manual (Page 25)

Chapter 4: Additional Information
Chapter 4 23
Troubleshooting
Most problems you encounter with your CD Recorder can be corrected by consulting the
following troubleshooting list.
Recorder Problems
Recorder won’t turn on
•
Make sure the unit is plugged in.
• Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in
something else.
• Something might be wrong with your remote control. Press the POWER button on
the front of the recorder. If it turns on, check the remote control solutions below.
Buttons don’t work
Unplug the unit for two minutes and then plug it back in. Turn it on and try again.
No sound
•
If you have the CD recorder connected to your A/V receiver, make sure all the
connections are snug.
• Headphones may be connected. Try unplugging them.
OPT or DIG flashes on the display when attempting to record digitally
The external player may not be compatible with the digital or coaxial inputs on the
recorder. You’ll need to do an analog recording.
The Remote Control Doesn’t Work
• Something might be between the remote and the remote sensor on the component.
Make sure there is a clear path.
• Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries
in the remote.
• You might need to drain the remote’s microprocessor: remove batteries and press the
number 1 button for at least 60 seconds. Release the 1 button and replace the
batteries.
15920520.04 Additional 9/24/02, 3:55 PM 23