Chapter 2: playing cds, Repeat, Random – RCA CDRW120 User Manual
Page 16

Chapter 2: Playing CDs
14
Chapter 2
4.
To program the next track, press TIME SET/PROGRAM again (or TIME SET/PROG on
the remote control).
5.
Enter the second track using the number buttons on the remote or the SKIP/SEARCH
arrow buttons on the front of the recorder.
6.
To select the second track, press TIME SET/PROGRAM (or TIME SET/PROG on the
remote control) (OK appears).
7.
Enter any additional tracks using steps 4-6.
8.
When finished, press STOP to stop programming.
•
To review your programmed tracks, press and release the left SKIP/SEARCH arrow
button repeatedly to scroll through the tracks (the tracks appear, with the last track
you programmed showing first).
•
To play your programmed tracks, press PLAY (the tracks play in the order you
programmed them).
•
To clear your programmed tracks, press and release STOP until PROG. disappears
from the display.
Note: Programmed tracks are cleared if either disc tray is opened.
Repeat
You can repeat a single track, an entire disc, just your programmed tracks, or both discs A
and B. All repeat modes will continue to play until you turn them off.
Press and release the REPEAT button repeatedly to scroll through the modes:
REPEAT 1
– repeats the current track
REPEAT
– repeats the current disc or programmed tracks
REPEAT ALL
– repeats all discs or programmed tracks
Random
You can play your programmed tracks and both disc A and B in random order.
1.
To start random play, press the RANDOM button on the remote (RANDOM appears).
2.
To stop random play, press RANDOM again (RANDOM disappears).
Note: If you open either disc tray, random play is stopped.
15920520.02 Playing CDs
9/24/02, 3:55 PM
14