Rackmount Solutions XRT Series - Manual (Page 6)

5
RECEIVING INSPECTION
After removing your Minuteman XRT UPS from its carton, it should be inspected for
damage that may have occurred in shipping. Immediately notify the carrier and place of
purchase if any damage is found. Warranty claims for damage caused by the carrier
will not be honored.
PLEASE SAVE THE PACKING MATERIALS!
The packing materials that your UPS was shipped in are carefully designed to minimize
any shipping damage. In the unlikely case that the UPS needs to be returned to
Minuteman, please use the original packing material. Since Minuteman is not responsible
for shipping damage incurred when the system is returned, the original packing material
is inexpensive insurance.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’emit pas de bruits radioélectriques dépassant les
limites applicables aux appareils numérique de la Class A prescrites dans le Règlement
sur le brouillage radioélectrique édicte par le ministère dès Communications du Canada.
Shielded communications cables
must be used with this equipment
RADIO FREQUENCY INTERFERENCE
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the users authority to operate this equipment.