Self test – Rackmount Solutions XRT Series User Manual
Page 33
32
SELF TEST
To have the XRT600 UPS perform a 10 second self test, press the
Test/Alarm Silence key. This will perform the self test and report any
errors to the LED display. A successful self test is indicated by the
normal AC LED being lit.
For the XRT1000 and above units, select the TEST MENU on the LCD
screen and then select the QUICK TEST. The screen will report
“TESTING” until the completion of the self test. If the unit is OK the screen
will return to the Quick Test menu, otherwise the error will be reported as
previously described.
When all faults are cleared, the LCD front panel screen returns to Mode
Display. Pressing the MENU button will transfer you to the STATUS
MENU described previously. In the LED front panel version the error code
will be cleared and the normal conditions will be displayed.