Nokia 5125 - Manual (Page 24)

17
5. Settings
This section describes some phone settings that allow you to
customize your phone to suit your preferences and that you
probably will not change very often.
Automatic redial
Use Menu 4 1 2 to turn this feature on or off. When this
feature is on and the wireless network is busy, your phone
will redial a number up to three times. This feature will not
redial to a busy phone number.
To stop the call attempts, press Quit or .
Calling card set-up
If you wish to use a calling card for long
distance calls, you must first save your
calling card information into your phone.
Your phone can save information about
two calling cards.
To learn how to make calling card calls, see ‘Calling card
calls’ on page 32.
For more information on Prepaid services, see page 55.
Saving calling card information
1 Press Menu 4 1 3.
2 Scroll to the desired calling card, then press Options.
3 Scroll to Edit, then press OK.
4 Enter your security code (see page 56), then press OK.
5 At Dialing sequence, press Select. Press to choose
the dialing sequence your card uses, then press Select.
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6 Enter access number (usually the 1-800 number listed
on the back of the calling card), then press OK.
7 Enter your card number and/or PIN, then press OK.
Your phone will display Save changes? Press OK.