Nokia 3105 - Manual (Page 41)

Using the menu
41 Copyright © 2005 Nokia. All rights reserved.
1. In standby mode, press and hold the right selection key ( Contacts or Go to ) for
two seconds. A tone is heard and Speak now is displayed.
2. After the tone, clearly speak the voice tag that you recorded previously into the
microphone.
Note: If the voice tag is not recognized by the phone or if you fail to
speak a tag within three seconds after the tone, the message
Name
not found is displayed, and you are returned to the standby mode.
3.When the voice tag is recognized:
• The phone book entry will be displayed for three seconds.
• The voice tag is replayed (through the ear piece).
• After three seconds, the number is dialled.
The only other option for initiating voice dialling is to press the headset button
momentarily while in standby mode. The alert tones play through the headset.
Speak the voice tag into the headset microphone. The voice tag will playback
through the headset to confirm your choice.
For further information on voice dialling and voice commands see Voice on
page 54 .
■ Profiles (Menu 4)
Your phone has various setting groups, called profiles, for which
you can customise the phone tones for different events and
environments.
9235338_en_2_web.fm Page 41 Thursday, August 25, 2005 1:19 PM