NorthStar Navigation Northstar NS100 - Manual (Page 27)

26
Northstar NS100
Show or hide the boat’s position
If you have entered the boat's position
manually (see Reference Section 1 - Set your
position and time manually), the position is
always shown on the screen with the prefi x
MAN.
However, if the boat's position is being updated
through a GPS navigation receiver, you can
show or hide the boat's position on the LCD
screen.
1. Move the cursor to GPS/DATA and press
>ENT.
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME FORMAT
TIME DISPLY
>LL DISPLAY LL DISPLAY
>ON
OFF
2. Move the cursor to SETTING and press
>ENT.
3. Scroll through the GPS/DATA menu to LL
DISPLAY and press >ENT again.
4. Press >ENT again to have the LCD screen
show the boat's position
OR
move the cursor to OFF and then press
if you want to hide the boat's position.
GPS alert setting
BUDDY LIST
LOCAL/DIST
USA/INT/CAN
>GPS/DATA GPS/DATA
MANUAL
>SETTING
SETTING
TIME DISPLY
LL DISPLAY
>GPS ALERT GPS ALERT
>ON
OFF
The GPS alert is usually set to ON so that if
the GPS navigation receiver is disconnected,
warning alarm beeps sound.
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to SETTING and press
>ENT.
3. Scroll through the GPS/DATA menu to GPS
ALERT and press >ENT again.
4. Press >ENT again to have the GPS alert ON
OR
move the cursor to OFF and then press
to turn it off.