NEC XL-6500G - Manual (Page 37)

37
3.OPERATION
Provides access to controls for your image such as brightness,
contrast, color, sharpness, hue, color temperature, gamma correction.
NOTE: Color, tint, and sharpness are available for an RGB source
only.
1. Use the CURSOR , , or button to select the item you
want to adjust and press the ENTER button.
Items to select
• Brightness ------------ Adjusts the overall image and background
screen brightness.
• Contrast --------------- Adjusts the image brightness in relation to
the background.
• Color ------------------ Adjusts the color intensity of the image.
• Sharpness ------------ Adjusts the detail of the image.
• Hue -------------------- Adjusts the red and green values of the
image.
• Color Temperature --- Adjusts the color temperature.
• Gamma Correction--- Adjusts the brightness of a dark area on the
screen.
2. Use the CURSOR buttons to adjust the picture to your desired
setting.
The CURSOR or button increases the level.
The CURSOR or button decreases the level.
*For Gamma Correction, follow the instructions below.
1. Use the CURSOR or button to select either "Table" or
"User Table" and press the ENTER button.
2. Use the CURSOR / or / button to select your
desired mode and press the ENTER button.
Picture Control
- P i c t u r e C o n t r o l -
1 . B r i g h t n e s s
2 . C o n t r a s t
3 . C o l o r
4 . S h a r p n e s s
5 . H u e
6 . C o l o r T e m p e r a t u r e
7 . G a m m a C o r r e c t i o n
G a m m a C o r r e c t i o n
T a b l e [ D e f a u l t 1 ]
U s e r T a b l e [ 1 . 0 ]
Lens Control
Allows you to adjust the focus and the vertical offset for your image.
You can also display the Lens Control adjustment screen directly by
holding down the CTL button and then pressing the OPERATE
button.
The CURSOR or button adjusts the focus.
The CURSOR or button adjusts the vertical offset.
L e n s C o n t r o l
- F o c u s / O f f s e t -
F o c u s
O f f s e t