Eizo ColorEdge CG241W - Manual (Page 8)

6
Attach the open/close cover to the left hood.
Note
• Do not attach the open/close cover to the right hood. Doing so prevents the cover from closing.
7
Place the open/close cover on the top of the left hood (without contacting the
metal fitting) from front (1) to back (2).
8
Slide the open/close cover to the right (3) until it contacts the stopper on the
metal fitting.
9
When performing calibration, slide the open/close cover to the right in order to
attach the sensor.
Note
• The open/close cover does not slide onto the right cover.