Eizo ColorEdge CG241W - Manual (Page 4)

Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged,
contact your local dealer.
NOTE
Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Power cord
• Digital signal cable (FD-C39)
• Analog signal cable (FD-C16)
• EIZO USB cable (MD-C93)
• Hood
• Mounting Screws (M4 x 12, 4 pcs)
• Cleaning kit "ScreenCleaner" • EIZO LCD Utility Disk (CD-ROM)
- Calibration software "ColorNavigator"
- User’s Manual
• Setup Manual (this manual)
• ColorNavigator Quick Reference
• Limited warranty
• Recycling Information
• Adjustment Certificate
Controls and Functions
1 Sensor Detects ambient brightness. BrightRegulator function.
Refer to the User’s Manual on the CD-ROM.
2 Adjustment Lock button This function locks the buttons to retain the status adjusted or set once.
3 Input Signal Selection
button
Switches input signals for display when two PCs are connected to the monitor.
4 Mode button Allows you to switch the display mode.
5 Auto button Performs the function to adjust the screen automatically. (analog input only)
6 Enter button Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.
7 Control buttons
(Left, Down, Up, Right)
Chooses an adjustment item or increases/decreases adjusted values for advanced
adjustments using the Adjustment menu.
8 Power button Turns the power on or off.
9 Power indicator Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
Flashing blue (2 times for each): When the timer is set for ColorNavigator, notifies that
a recalibration is required (for CAL mode or EMU mode).
10 Security lock slot Complies with Kensington’s MicroSaver security system.
11 Power connector Connects the power connector.
12 Input signal connectors DVI-I Connector x 2
13 USB port (Up) Connects the USB cable in order to use the provided software. For how to use it, refer
to the User’s Manual on the CD-ROM.
14 USB port (Down) Connects a peripheral USB device.
15 Stand Used to adjust the height and angle of the monitor screen.
16 Cable holder Covers the monitor cables.
* ScreenManager ® is an EIZO’s nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.)
Adjustment menu
(ScreenManager
® * )