Network Equipment Technologies 500 - Manual (Page 22)

10003137.00 Rev.1
3-2 Screen display
Screen display
Figure 7: Screen display for Primary Rate Access
The PAP screen, an example of which is shown in Figure 7, contains the following
elements:
Status line displays the status of the PrimeSwitch, including operation state, link
status, level of layer 2 and layer 3 decoding, and other information.
For Basic Rate access, the current CES is displayed at the far right of
the status line.
See Status line later in this chapter.
Display
window displays traffic sent and received, and lists the contents of the
message pool and other information.
When the program starts it shows a block diagram with credits,
software version, connection information and buffer size.
Use the cursor keys to scroll through a display that is longer than the
window.
See Keys in Chapter 4 — Commands.
Layer 1 status
line displays the network and user layer 1 states. These are only updated
during monitoring. See Layer 1 status line later in this chapter.
Command
window displays entered commands. See Commands in Chapter 4 —
Commands.
Command
line displays function key definitions of commands. Available commands
depend on the current operation.
Help window
(not shown) temporary window displayed over the rest of the screen.
Status line
Display
Layer 1
status line
Command
window
Command
line
window