Replacing the battery pack – Nintendo DSi XL User Manual

Page 10

Replacing the Battery Pack

Basics

1. Press and hold the Power/Reset button (at least .5 second) until the power shuts off.

2. Make sure the AC Adapter is unplugged from the Nintendo DSi.

1. Loosen the two Phillips-head (+) screws on the battery cover with
a screwdriver, and remove the battery cover.

IMPORTANT: To avoid damage to the screw or threads, use a screw-
driver that is appropriate for the screw.

2. Remove the battery pack as shown at right.

3. Orient the new battery as shown and carefully insert completely
into the battery compartment.

4. Replace the battery cover, and tighten the two screws, being
careful not to overtighten.

IMPORTANT: Always be sure to replace the battery cover and tighten
the screws before resuming use.

Battery packs become worn with repeated charge/discharge cycles, and the amount of time they can be
used when fully charged will decrease gradually over time. If you feel the usage time has dropped off
noticeably, replace the battery pack.
• Do not use any battery other than the Nintendo DSi XL rechargeable battery, Model No

UTL-003. A replacement battery may be ordered through Nintendo’s web site at

store.nintendo.com (USA/Canada only) or by calling Customer Service at 1-800-255-3700.

• A parent or guardian should replace the battery pack if a young child is using the system.

PLEASE RECYCLE YOUR USED BATTERIES

When disposing of a rechargeable battery, please be sure to follow appropriate local guidelines
and regulations.
• Do not disassemble, attempt to repair, or deform the battery pack.
• Do not dispose of rechargeable batteries in a fire.
To find a collection site near you, please contact your local solid waste authority or visit:
http://www.epa.gov/osw/conserve/materials/battery.htm
For more information or for assistance from Nintendo, e-mail us at [email protected].

• Place tape over the battery contacts before recycling.

Before replacing the battery...

Battery replacement procedure