Nortel Networks 4134 - Manual (Page 39)

39
20. Configure Dial peer for FXS phones:
dial-peer voice pots 1
destination-pattern 74001
port 2/1
forward-digits all
no shutdown
exit pots
dial-peer voice pots 2
destination-pattern 74002
port 2/2
forward-digits all
no shutdown
exit pots
21. Configure Dial peer for PRI interface and (optionally) apply translation profile.
(Following dial peer is for calls coming from SPS with a number starting with 53 to be
translated to a number starting with 3353 before sending on PRI. Don’t use translation
profile if no translation required. )
dial-peer voice pots 3
destination-pattern 53.%
port 3/1
forward-digits all
no shutdown
translation-profile outgoing sps2pstn
exit pots
(Following dial peer is for calls coming from PSTN with a number starting with 3353 to
be translated to a number starting with 53 before sending to SPS. Don’t use
translation profile if no translation required. )
dial-peer voice pots 4
destination-pattern 3353.%
port 3/1
forward-digits all
no shutdown
translation-profile incoming pstn2sr
exit pots
If no translation required than instead of dial-peer 3 and 4, only 1 dial peer is required with
destination-pattern 53.% (assuming that all PRI numbers are starting with 53).
Following is an example if a 911 call is to be routed to PRI interface.
dial-peer voice pots 5
destination-pattern 911
port 3/1
forward-digits all
no shutdown