Nortel Networks BCM 450 - Manual (Page 11)

Page 11
To configure conference settings:
1. To change conference settings, press 2.
2. To permit QuickStart, press 1. Otherwise, press #.
If you press 1, future conferences will start when the
participants arrive.
If you press #, future conferences will start when the
chairperson arrives.
Note: When you enable the QuickStart feature on a Meet
Me Conferencing bridge that external conference
participants can access by using a 1-800 number, there is
a risk that your company can incur unauthorized toll
charges. To avoid this type of fraud, do not enable the
QuickStart feature on a conference bridge that can be
accessed with a 1-800 number.
3. Configure how the conference will end:
To allow the conference to continue after you disconnect,
press 1.
To terminate the conference when you disconnect, press
#.
To access the conference call as a participant:
1. Press FEATURE 930.
2. If prompted, say your name.
3. If prompted, enter the passcode.
For more information about using the Meet-Me Conferencing feature, see
the Meet-Me Conferencing User Guide.
Telephone features