Eizo FORIS FS2331 - Manual (Page 23)

23
Chapter2AdjustingScreens
Setting Procedures
1.
Perform the auto adjustment.
●
To adjust flickering, screen position, and screen size automatically “Auto Screen
Adjust”
Procedure
1. Choose “Screen” in the Setting menu, and press
.
2. Choose “Auto Screen Adjust” in the “Screen” menu, and press .
3. Select “Yes” with or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming “1.Performtheautoadjustment.”(page23) ,
performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed
correctly,goto
“5.Adjustingcolorgradation.”(page25) .
2.
Prepare to use analog screen adjustment patterns.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”.
Note
• For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically “Auto Screen
Adjust”
Procedure
1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern files”.
2. Choose “Screen” in the Setting menu, and press .
3. Choose “Auto Screen Adjust” in the “Screen” menu, and press .
4. Select “Yes” with or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming “3.Performtheautoadjustmentagain
withtheanalogscreenadjustmentpatterndisplayed.”(page23) ,performtheadjustmentsaccordingto
theproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto “5.Adjustingcolor
gradation.”(page25) .