Navman iCN 520 - Manual (Page 72)

72
iCN 500 Series | User Manual
Activate Basemap
1. Disconnect the USB cable from the iCN.
The iCN will turn on.
• If the iCN does not turn on, press .
2. From the iCN Main Menu screen, tap Preferences.
3. From the Preferences screen, tap Maps.
4. Complete one of the following:
• If the Basemap is on the iCN, from the Maps screen, select Internal Memory.
The Maps - Internal Memory screen will display.
• If the Basemap is on the memory card, from the Maps screen, select Memory Card.
The Settings - Memory Card screen will display.
5. To activate the Basemap, select the Basemap check box.
6. Tap Save.
The Main Menu screen will display.
Remove Basemap
1. Open Smart Desktop if it is not already open:
Start  Programs  Navman  Smart Desktop 2005 for iCN500 series.
2. On the Map menu, click Basemaps.
The Navman Basemap Installer window will open.
3. Select the Basemap to remove.
4. Click the appropriate Remove button to remove the Basemap from your iCN, memory card
or memory card reader.