NISSAN 2010 GT-R - Manual (Page 7)

WINDSHIELD WIPER/WASHER SWITCH
Ⅲ The ignition switch must be in the ON position to
activate the windshield wipers.
Ⅲ Move the lever to the following positions to operate the
windshield wipers:
Intermittent (INT) – Front wipers operate intermit-
tently and can be further adjusted by twisting the
time control ring .
Low Speed (LO) – Continuous low-speed
operation of front wipers.
High Speed (HI) – Continuous high-speed operation of front wipers.
Mist (MIST) – Lift the lever up for one sweep of the front wipers.
Ⅲ Pull the lever toward you to activate front washer fluid and several sweeps of the wipers.
HEADLIGHT AND TURN SIGNAL CONTROL
HEADLIGHT CONTROL SWITCH
Ⅲ Turn the headlight control switch to the
position to turn on the front parking, tail, license plate
and instrument panel lights.
Ⅲ Turn the headlight control switch to the posi-
tion to turn on the headlights. All other lights remain on.
HIGH BEAM
Ⅲ Push the headlight control switch forward to se-
lect the high beam function. The blue indicator
light illuminates. Pull the headlight switch back to the
original position to select the low beam. The blue
indicator light goes off.
Ⅲ Pull and release the headlight control switch
to flash the headlight high beams on
and off.
5