NISSAN 2010 GT-R - Manual (Page 20)

TITANIUM-FINISH ALLOY WHEELS
Your vehicle is equipped with titanium-finish alloy wheels that should be cleaned regularly
with a sponge dampened in a mild soap solution, especially during winter months in areas
where road salt is used. Salt could discolor the wheels if not removed. To help prevent
damage to your high-end titanium-finish alloy wheels:
Important Customer Information
Ⅲ Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.
Ⅲ Do not apply wheel cleaner to the wheels when they are hot. The wheel temperature
should be the same as the ambient temperature.
Ⅲ Rinse the wheel completely to remove the cleaner within 15 minutes after the cleaner is
applied.
OUTSIDE MIRROR CONTROL SWITCH
Ⅲ Rotate the control switch to select the right or left
mirror.
Ⅲ Adjust the selected mirror to the desired position by
operating the control switch .
Ⅲ Push the switch down to fold the selected mirror
inward.
Ⅲ Push the switch
up to return the selected mirror to its prior position.
POWER WINDOWS
The power windows operate when the ignition switch is
placed in the ON position, and for about 45 seconds after the
ignition switch is placed in the OFF position. If the driver’s or
front passenger’s door is opened during this period of about
45 seconds, power to the windows is canceled.
AUTOMATIC ADJUSTING FUNCTION
The front door power windows have an automatic adjusting
function. This ensures the windows close completely to help
seal against wind noise and weather leaks.
When the front doors are being opened, the windows automatically lower slightly to avoid
contact between the windows and the side roof panels.
When the doors are closed, the windows automatically raise slightly.
18