beautypg.com

NordicTrack AudioStrider 30725.0 User Manual

Page 14

background image

14

HOW TO USE THE MANUAL MODE

Note: If there is a sheet of clear plastic on the face of

the console, remove the plastic.

1. Press any button on the console or begin ped-

aling to turn on the console.

When you turn on the console, the display will

light. A tone will then sound and the console will

be ready for use.

2. Select the manual mode.

When you turn on the console, the manual mode

will be selected. If you have selected a program,

reselect the manual mode by pressing any of the

Programs buttons repeatedly until zeros appear in

the display.

3. Begin pedaling and change the resistance of

the pedals as desired.

As you pedal, change the resistance of the pedals

by pressing the OneTouch Resistance buttons.

There are twelve resistance levels. Note: After you

press the buttons, it will take a moment for the

pedals to reach the selected resistance level.

4. Follow your progress with the display.

While you pedal, the upper left corner of the dis-

play will show the elapsed time.

The lower left corner of the display will show your

pedaling speed, in revolutions per minute.

The upper right corner of the display will show

your heart rate when you use the handgrip pulse

sensor (see step 5 on page 15).

The lower right corner of the display will show the

distance (total number of revolutions) that you

have pedaled.

The center of the display will show the resistance

setting of the pedals for a few seconds each time

the resistance setting changes.

To view the approximate number of calories that

you are burning per hour and the approximate

number of calories that you have burned during

your workout, press the Display button.

You can also view selected information at a larger

size. Press the Display button repeatedly to view

the elapsed time, the distance that you have ped-

aled, your pedaling speed, or the approximate

number of calories that you have burned.

To again view the elapsed time, your pedaling

speed, and the distance that you have pedaled,

press the Display button again.