Pair devices – Nokia 5228 User Manual

Page 88

3. Select the device with which you want to connect.
4. If the other device requires pairing before data can be transmitted, a tone

sounds, and you are asked to enter a passcode. The same passcode must be

entered in both devices.
When the connection is established, Sending data is displayed.

Tip: When searching for devices, some devices may show only the unique

address (device address). To find the unique address of your device, enter

*#2820#.

Pair devices

Select Menu > Settings and Connectivity > Bluetooth.
To pair with compatible devices and view your paired devices, open the Paired

devices tab.
Before pairing, create your own passcode (1 to 16 digits), and agree with the owner

of the other device to use the same code. Devices that do not have a user interface

have a factory-set passcode. The passcode is used only once.
1. To pair with a device, select Options > New paired device. Devices that are

within range are displayed.

2. Select the device, and enter the passcode. The same passcode must be entered

on the other device, as well.

3. Some audio accessories connect automatically to your device after pairing.

Otherwise, to connect to an accessory, select Options > Connect to audio

device.

Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, select from the following:
● Set as authorised — Connections between your device and the authorised

device can be made without your knowledge. You will not be asked for

authorisation or acceptance separately. Use this status only for your own devices,

Connectivity