NEC NP-P350X - Manual (Page 36)

18
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
Rotate the lens shift dial.
In this user’s manual, the upward maximum shift is referred to as “normal position”.
NOTE:
The lens shift dial cannot be rotated beyond the maximum upward or downward shift. Forcibly rotating may cause damage to the
projector.
TIP:
Lens shift can be adjusted with the range below. If you wish to move up the image higher than this limit, use the tilt foot of the
projector.
Desktop front projection
[P420X/P350X]
[P350W]
Downward
Upward
Lens shift dial
Height of projected
image
Height of projected
image
Vertical shift range (0 to 0.5V)
Vertical shift range (0 to 0.6V)