Navman iCN 600series - Manual (Page 7)

7
iCN 600 series | User Manual
4. Turning your iCN On and Off
Use the Menu/Power button to turn your iCN on and off.
Turn iCN On
1. Plug the power adapter into the socket on the left of the iCN and the other end into the vehicle lighter socket.
2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal position
to allow it to obtain a GPS fix.
3. Press the Menu/Power button for one second.
Turn iCN Off
1. Gently push the GPS receiver back towards the iCN. The receiver will click in to place.
2. Complete one of the following:
• iCN 610, 650: Press the Menu/Power button for three seconds. When the confirmation message displays,
select Yes and press OK. The iCN will turn off.
• iCN 635: Press the Menu/Power button for three seconds until the iCN turns off.