Nikon SB-28 - Manual (Page 85)

85
Available external power sources
External power source SD-7
External power source SD-8/8A*
Power Bracket SK-6/6A*
Use only Nikon-approved external power sources
Using external power sources other than those specified by Nikon
may cause damage to the SB-28.
* Available in the European market only.
Using an external power source
Nikon’s external power source DC Units increase the number of
flash firings and provide faster recycling time. (See page 93.)
To use a DC Unit, connect its power cord to the SB-28's external
power source terminal.
• Even when a DC Unit is used, the SB-28 still requires batteries inside the flash unit.
NOTE
Because the European version of the SB-28 comes with a different shaped
connector, Nikon DC Units SD-7, SD-8 and the Power Bracket Unit SK-6
are not compatible.
External power source terminal External power source terminal
(for European market)