Nikon SB-28 - Manual (Page 73)

73
3
Set the desired exposure compensation.
—Press the
{ or } button to increase or decrease the compensation.
• Exposure compensation is possible in 1/3 steps from –3.0 to +1.0 EV.
• The shooting range indicator bars
_ automatically change according to
the amount of exposure compensation.
4 Press the [ button to make the exposure compensation
value stop blinking.
• The exposure compensation value blinks during adjustment and stops
after 8 seconds unless an adjustment is made. The last blinking number
is the one automatically set.
Canceling exposure compensation
Flash exposure compensation cannot be canceled by turning the SB-28
off. To cancel, reset the exposure compensation to 0.0 following the steps
outlined above.