Nikon SB-28 - Manual (Page 5)

All LCD (liquid crystal display) figures and marks do not appear at
the same time. They are shown together here for ease of explanation.
1 Flash mode indicator (P.22)
t Ø Automatic Balanced Fill-Flash with TTL
Multi-Sensor
tø Matrix Balanced Fill-Flash,
Center-Weighted/Spot Fill-Flash
t Standard TTL Flash
ƒ Manual Flash (P.46)
% FP High-Speed Flash sync (P.49)
" Repeating Flash (P.52)
˙ Non-TTL Auto Flash (P.42)
2 Film speed (ISO)/number of repeating flashes per
frame/frequency indicators (P.18 / P.52)
3 Flash shooting range indicator bars (P.13)
Notes on LCDs
• Because LCDs are difficult to read when viewed from the side, you should look at
the LCD panel directly.
• LCDs are temperature sensitive and may turn black at high temperatures (approx.
60°C or 140°F). They clear up when the temperature returns to normal (20°C or
68°F).
• In cold temperatures (approx. 5°C or 41°F and below), the LCDs’ response time
slows down. This is typical of LCDs and no cause for concern. LCDs will function
properly once the temperature returns to normal (20°C or 68°F).
NOTE
Using the SB-28 in dim light
Press the
. button to turn the illuminator on. Press the button again to turn it off. The illuminator
turns off automatically after approx. 16 sec. when the SB-28 is not in use.
LCD panel indications
4 Red-eye reduction indicator (P.76)
5 Zoom-head position indicator (P.19)
6 Flash output level indicator (P.50)
7 Exposure compensation indicator (P.72)
8 Underexposure indicator (P.28)
9 Exposure compensation/underexposure value
(P.72 / P.28)
10 Flash shooting distance scale (m: meter) (P.13)
11 Flash shooting distance scale (ft: feet) (P.13)
12 Standby mode indicator (P.15)
13 AF assist illuminator LED canceled indicator (P.82)
14 Aperture indicator (P.42)
1
14
13
12
11
10
9
8
7
6
5
4
3
2
5